FAQ

How to repurpose spindles

Contents show

What can you do with old spindles?

Spindles are versatile pieces begging to be repurposed. … Once you start looking, you will find reused spindle ideas everywhere.

  1. Grandma’s Front Porch Wall Hanging. …
  2. Festive Snowman Snow Sticks. …
  3. Flowering Drawers Porch and Garden Planters.

Can you reuse spindles?

You can reuse spindles or even get new ones if you have any specific decoration idea in your mind. Before you start creating decorations using spindles, here are some different types of spindles that will help you to gather ideas about how to reuse them.

What can I do with an old banister?

Check out the list below.

  1. Make a kitchen pot rack. For a rustic look in the kitchen, repurpose your old porch rails into a pot rack. …
  2. Turn it into indoor railing. …
  3. Turn it into a porch ladder. …
  4. Turn it into a table. …
  5. Make an apron rack. …
  6. Turn old railings into a console table. …
  7. Create a rustic headboard. …
  8. Make candlesticks.

Are spindles outdated?

Both a safety and style feature, your interior railing spindles are vital in connecting your home’s overall aesthetic. However, many homeowners have outdated spindles in their space, and could benefit greatly from a new set. The most popular spindle type, wood spindles give a classic, clean feel to any home.

Can you reuse balusters?

If the structural components such as balusters, handrails, and newel posts are not sound, they should not be reused. If your baluster spacing currently allows for a sphere greater than 4 inches to pass through at any point, a renovation will be required to reduce the spacing.

What are wooden spindles used for?

A spindle is a straight spike usually made from wood used for spinning, twisting fibers such as wool, flax, hemp, cotton into yarn.

How do you reuse stair railings?

Other Ways to Reuse Stair Railings They can be made into tall and elegant candle holders, be used for table legs, they can be cut and used as finials, as embellishments for picture frames or can be made into a plant stand.

What do I do with old newel post?

A matched set of salvaged newels can be attached to either side of an old door to make a one-of-a-kind headboard. You could also use a pair to prop up a countertop that extends beyond base cabinetry on a kitchen island or peninsula to create a bar-seating and food-service area.

How do you repurpose wood stairs?

How do you paint Bannister spindles?

Dip your hand into the paint and apply it to all areas, making sure not to miss any of the nooks and crannies. After letting the paint dry for about 6-8 hours you’re ready for the second coat. You can also very gently sand the spindle again before applying the second coat for that super smooth finish.

How do you paint banister spindles?

How do you update an old banister?

How do you update spindles?

How do you clean an old wooden banister?

The first step will still be to wipe away any loose dirt and dust from the banister. Next, spray a 2:1 water and vinegar solution directly onto the wood and let sit for a minute to penetrate the grime. Take a clean dry microfiber cloth and, using a little elbow grease, wipe the mixture, along with the dirt, away.

Can you paint stair banisters & railings?

You can paint or stain a stair railing with durable results if you use a durable top coat like polyurethane. Do I need to sand railings before painting? Because stair railings are one of the most touched surfaces in a home, it is highly recommended to sand first.

Can you use a baluster as a table leg?

While this latest batch of turned wood architectural goods includes some arguably snazzy and convenient plug-and-play table legs, it’s worth mentioning that balusters also make a fine substitution.

Can I use spindles as table legs?

Spindles have a similar aesthetic as table legs, but their length makes them ideal for creating a tall console table. They might look old-fashioned at first, but a little paint and stain can make all the difference.

Are balusters and spindles the same thing?

A baluster and spindle is actually almost the same thing, but the word spindle is more commonly used because it is easier to remember and say. Balusters usually rest on a footing; this could be a step, floor or deck, whereas, spindles are supported by a horizontal rail at the bottom that is attached to the posts.

How old is the drop spindle?

Historical Background: Drop Spindles were in use before recorded history. Most historians agree that the practice of spinning fibers into yarn or thread existed over 10,000 years ago. The drop spindle could have been used for over 9,000 years before the spinning wheel was invented in India during the late Middle Ages.

What is the difference between banisters and balusters?

"Baluster" has come to mean any brace between the handrail and footrail (or string) of a railing system. So, the banister is really the spindle, which would not be such a smooth ride sliding down the "baluster."

Can you replace stair spindles with glass?

People often choose to replace worn or outdated spindles with glass panels to create a fresh new look for their staircase. Fitting panels, whether attaching them with glass clamps or brackets or inserting them into grooved base and handrails, is a relatively straightforward process.

How do you replace wood spindles with an iron?

Instructions

  1. Use reciprocating saw to cut wooden balusters in half.
  2. Pull out of each end and discard.
  3. Sand railing and stain or paint. …
  4. Measure the height for each spindle.
  5. Use reciprocating saw to trim iron spindles to height.
  6. Stick spindle up into top railing.
  7. Add glue or epoxy into lower hole.

Can you replace stair spindles?

There are really just three steps involved in replacing a broken spindle: remove the old one, find a replacement, and fit it in.

How do you refinish a newel post?

How do I update my newel post?

How can I redo my stairs cheap?

How do you renovate stairs on a budget?

How can I refinish my stairs without sanding?

How to Refinish Wood Stairs without Sanding – The Process

  1. Step No. 1 – Cleaning the Surface.
  2. Step No. 2 – A Little Sanding Never Hurts Anyone!
  3. Step No. 3 – Dabbing the Surface Clean – Once Again!
  4. Step No. 4 – Taping the Sides of the Staircase.
  5. Step No. 5 – Applying the Stains.
  6. Step No. 6 – Let It Sit for a While.

Can you paint spindles with a sponge?

Dip the sponge into the paint on one side as you will see in the video and apply to the piece you’re painting. For areas like spindles the sponge folds to wrap around each spindle coating it evenly with paint. Here’s my quick demo using this sponge.

Can you paint over varnished stair spindles?

Things You’ll Need However, you can’t simply slap a couple of coats of paint over a varnished banister, or any varnished surface, and expect it to last. The surface has to be cleaned and sanded, then primed before painting, otherwise the paint will scratch right off the shiny surface.

What is the best paint for stair spindles?

The most common coating used for spindles is acrylic paint, in which case a small airless sprayer would work great, but you need to be a little more careful with the masking to make sure the surrounding area is well protected from hovering over-spray.

Do you have to sand spindles before painting?

Even if you have kids that like to grab onto the spindles you still don’t need to sand them in my opinion. So sand just the tops of the handrails, just enough to rough them up a bit and scratch the surface, don’t worry about sanding underneath and in between each spindle… again too much work.

Can you paint spindles with a sock?

The miracle worker that Pinterest gave me was to paint the spindles with a sock! I wore a plastic glove, put the sock over that, then dipped my sock covered hand in the paint, and rubbed all along the spindle to get paint in all the nooks and crannies.

How do you sand and paint stair spindles?

Prepare the wooden surface. With a standard coating, paint can be easily removed using the Ultimate Aluminium Oxide Fine Paper. Simply sand each bannister spindle until they feel smooth and free from abrasions then clean away any dust with a Seriously Good Microfiber Cloth.

How do you refinish oak banister?

How do you paint stair spindles UK?

Dip your hand into the paint and apply it to all areas, making sure not to miss any of the nooks and crannies. After letting the paint dry for about six-eight hours, you’re ready for the second coat. You can also very gently sand the spindle again before applying the second coat for that super smooth finish.

Why is my wood banister sticky?

When mature woodwork gets sticky, it’s a sign that the finish has gotten dirty, coated with oils or wax, or that it’s breaking down. A surface that’s sticky or gummy is often the result of dirt and grime accumulation—especially when it’s frequently touched, like a handrail.

How do I make my wooden banister shine?

When no more dirt sticks to it, wipe the wood with the warm water cloth to quickly rinse off the cleaning solution. Once the banister is completely cleansed, allow it to air-dry. After drying, take a piece of clean cloth and buff the wood. Use quick circular motions to restore the banister’s shine.

How do you polish wood railings?

Water and vinegar can be used to clean almost anything. It is a natural, non-toxic way to clean things without worrying about abrasive chemicals and fumes. After all of the dust and debris are removed from the railings and banister, spray a mixture of water and vinegar (1:1 ratio) on a cloth and wipe down the wood.

Maybe you are interested in:

how to repurpose niacinamide

Related searches

  1. craft ideas using spindles
  2. how to decorate spindles
  3. cheap spindle ideas
  4. spindle ideas for staircase
  5. repurpose stair railing
  6. diy spindles
  7. what to do with old spindles
  8. stair spindles as table legs

Related Articles

Check Also
Close
Back to top button